Difference between revisions of "Tracing in Flash"

Revision as of 19:00, 31 October 2006

Before you begin tracing your story boards in flash we need to change some of the stage properties.

To change to stage properties click on the stage and select size

Now enter

Dimensions 720 px by 480 px (this matches the frmae size in permiere)

and

Change the Frame Rate to 15 fps (aprox 1/2 of the framerate in Permiere)

Select OK

Now we are ready to import our bitmap graphics. Go to File and select Import to Stage or Ctrl+R Select the bitmap you would liek to import. It may ask if you want to import a sereis on bitmaps. I usually say no as we are going to make a separate flash file for each scene.

Once you have selected the bitmap it will be called 'layer 1' you may want to rename it. I called mine 'OrigBitMap'.

Now you'll need another layer to start tracing. Press the new layer button right beloew the layers box.

I also like to turn off the grid snapping. Under View/Snapping I usually turn off Snap Align

Select the line tool

Change the color to something obvious (I like Yellow). I also like to turn the line width to at least 4 pixels (6 looks nice on a regular TV screen anything thinner may look jaggy).

Now Trace you image with straight lines it shoudl look simlar to below

Change to the Selection tool

The slection tool can now bend and add cv (press Ctl and click) to make the shape match your orignial drawing better.

You can also use the Subselection tool.

Once you have one shape traced you may want to add another layer or group that shape.