ZOOM H4 Handy Recorder Tutorial
IN PROGRESS
ZOOM H4 Handy Recorder Tutorial Overview This is a basic tutorial on how to use the Zoom H4 Handy Recorder (Clearance?) This tutorial covers the basic usage of the H4. For more information see the operation manual at: http://s3.amazonaws.com/samsontech/related_docs/H4_manual.pdf
Auto-Gain and Recording (Skip to step 4 if you don’t need auto-gain) Step 1: Turn on the device. Check that the “Mode” light, on the front, is on. This means the H4 is set to stereo mode. Step 2: The MENU button functions as five buttons. You can press down on the top, bottom, left, right, or middle. Press the bottom of the MENU button to bring up the INPUT MENU. Step 3: The JOG DIAL on the right side of the recorder can be pushed up, down, or inward. Pull down on the JOG DIAL until the cursor (the black arrow on the screen) is underneath “Auto Gain”. Press IN on the jog dial to select, and push up to turn Auto Gain on. Step 4: Press the REC button just above and to the right of the screen. The button will begin to flash, meaning it is in standby. If auto-gain is enabled (skip to 5 if not), the screen will display “REC LEVEL SCANNING…”. Record a sound slightly louder than what you intend to record (i.e. If you are recording a band, have them play at the loudest level; or if you are recording a person talking, have that person speak loudly in the microphone). Step 5: Press the REC button again to begin recording. If auto-gain is on, as long as the recording is quieter than the test the entire recording should be possible without distortion. Step 6: To stop the recording, press the REC button or press the TOP of the menu key. Playback While on the main screen move the JOG DIAL up or down until the arrow points to the file name. Press the JOG DIAL inwards to select the filename, then press up or down to switch between files. Stereo files are all recorded as STE-NNN.wav or .mp3 by default. Note: The easiest way to change the file name is with the computer, but if you will want to change it on the spot, please refer to Operation Manual linked in this tutorial.
Alternatively, you can select a file for playback by tapping the LEFT or RIGHT side of the menu button. HOLDING the left or ride side of the menu button will move forward or backward through the selected recording. Press the TOP of the menu button to Play the selected recording, and press it again to Pause the recording.
Connecting to the Computer
Make sure the recorder is off. Plug the USB cable into the left side of the recorder, and into the computer. Pull the jog dial DOWN to select “CONNECT TO PC”, then push the jog dial IN. The recorder is now connected to your PC and should appear as a “Removable Disk” in “My Computer” (Windows), or as a No Name external device (Mac).
Sounds recorded in Stereo mode will be located in the “STEREO” folder, on the device.
Removing the SD Card and AA Batteries Be sure the recorder is off! The screen should be blank and the switch on the left side of the recorder should be turned to off. On the top (microphone-end) of the recorder behind (if you are looking at the front of the recorder) the two microphones, there is a latch with an arrow pointing away from the mic. Pulling this latch out will release the cover. The two AA Batteries are located on either side of the SD Card, and can be dropped out be tilting the recorder. To remove the SD card press it down and release, then grab the card and pull it out.
