CD Burning
Img Burn
CD Burning using ImgBurn
Online Forums
http://forum.imgburn.com/index.php?showforum=4
DVD Video Burning
Burning video to DVD with DVDFlick
Audio CD Burning
Roxio Burn
Using Roxio Easy Media Creator 10
Step 1
Open Roxio Easy Media Creator 10 from the Program files.
This menu should load. If it asks for registration. CANCEL and select "Do not ask me again" and Continue.
The opening menu should look like this:
Step 2
Select Audio from the left. Audio guide should pop up looking like this:
Step 3
Choose Easy Audio CD.
Step 4
Click on Add Music from the top left under Easy Audio CD.
Step 5
Select from your files the audio files you wish to burn
Step 6
Make sure all the files you want are listed on the screen. This is a 1 time write only.
Select the source drive. You can change it at the bottom of the menu by using the drop down menu. Select it to where your blank CD is in your drive.
Press the big orange button on the bottom right of the program window. this will start the burning process.
Step 7
Once finished, this screen will show:
[Image:Roxio_Guide_08.png]
Congratulation you have finish burning an Audio CD using Roxio.
Toast for the MAC
Step 1
Open Toast from your dock.
Step 2
Select "Audio", instead of "Data", from the top-left menu.
Step 3
Click "Add", and select the audio files you wish to burn to the disk.
Step 4
Once you have uploaded all of your desired files, press the big red button in the bottom right hand corner of the screen to write your Data, and a dialogue prompt should appear.
Step 5
Make any changes you wish in the dialogue prompt, and press the "Record" button.
Step 6
A new dialogue prompt should have appeared, asking you to type a name for your CD. Type in the desired name, and press "OK".
Step 7
Toast should now be writing your data to your CD. After the "recording" is complete, you should see a window as follows:
It is suggested to press verify.
Step 8
Press okay on the new window that appears.
Step 9
Congratulations. You're done. Please, remember to close your CD drive after ejecting.
Data Burning
Roxio Data Burning
Step 1
Take a writable disk with enough space to store the data, and place it into the CD-RW drive.
Step 2
Open Roxio Easy Media Creator 10 Suite.
Step 3
Select Data and Backup from the left menu column.
Step 4
Select Data Disk from the drop down menu that appears to bring up the following screen:
Step 5
(If the disk is already loaded by roxio, do not click Load Disk.)
Click Load Disk so that Roxio can read the disk and bring up the following image:
Step 6
Click on "Add Data" and browse for the desired data to write to the disk. Repeat this step for each piece of data, and then click the big green button in the bottom right hand corner. To bring up the following screen:
Step 7
Click "close", and you're done!
Toast for MAC
Step 1
Get a writable disk with enough space to store the data, and Open Toast Titanium.
Step 2
Click on the open disk drive button in the bottom toolbar located at the bottom of the window. Insert your CD and click on the button one more time.
Step 3
Click the "Add Files" button also located near the bottom of the screen, and browse for the desired data to write to your CD.
Step 4
Once you have uploaded all of your desired files, press the big red button in the bottom right hand corner of the screen to write your Data, and a dialogue prompt should appear.
Step 5
Make any changes you wish in the dialogue prompt, and press the "Record" button.
Step 6
A new dialogue prompt should have appeared, asking you to type a name for your CD. Type in the desired name, and press "OK".
Step 7
Toast should now be writing your data to your CD. After the "recording" is complete, you should see a window as follows:
It is suggested to press verify.
Step 8
Press okay on the new window that appears.
Step 9
Congratulations. You're done. Please, remember to close your CD drive after ejecting.
